Transeal is a clear, solvent based, high gloss, acrylic sealer designed to be applied over properly prepared concrete pavers, brick, block, concrete, stucco, natural stone, flagstone, granite, limestone and bluestone. Forms a durable, flexible film providing long lasting protection. Exterior applications only.
Transeal WB is a clear, low odor, water based acrylic sealer designed to be applied over properly prepared concrete, pavers, brick, block, concrete, stucco, natural stone, flagstone, granite, limestone and bluestone. Transeal WB forms a durable, flexible film providing long lasting protection. Provides excellent adhesion and hot tire resistance.
Color-Seal is a water-based, low odor, acrylic stain and sealer designed to be applied over concrete, brick block, stucco and concrete pavers. Color-Seal provides long lasting protection while improving the appearance of the substrate by add adding color. Provides excellent adhesion and hot tire resistance.
Concrete Cure & Seal is a waterborne acrylic emulsion designed to cure, seal, harden and dustproof new or older concrete substrates. Forms a membrane on new concrete which retains water, allowing normal hydration. Contains no fillers, extenders, waxes or flammable solvents
Siloxane WB is a clear, water based, deep penetrating water repellent designed to be applied over untreated concrete pavers, brick, block, concrete, stucco and natural stone. Breathable, protects without forming a film or leaving a sheen. May be used for vertical and horizontal applications.
Siloxane 12 is an exterior grade, solvent based, clear, deep penetrating water repellent designed to be applied over untreated concrete pavers, brick, block, concrete, stucco, and natural stone. Breathable, does not form a film or leave a sheen. May be used for vertical or horizontal applications.
Siloxane 20 is an exterior grade, solvent based, clear, deep penetrating water repellent designed to be applied over untreated concrete pavers, brick, block, concrete, stucco, and natural stone. Breathable, does not form a film or leave a sheen. May be used for vertical or horizontal applications.
Paver-Saver is a one-component, clear, penetrating, water-based, aliphatic polyurethane designed to be used as a water, oil and stain repellent. Paver-Saver mechanically and chemically bonds to a wide variety of mineral substrates including, but not limited to concrete pavers, concrete slabs, stucco, natural stone, clay tile and brick. Paver-Saver reduces undesired stains, cracking, freeze/thaw damage, chemical degradation, biological growth, efflorescence and dirt pickup.
Paver-Saver Plus renews, rejuvenates & decorates faded concrete, concrete pavers, retaining wall block, stucco, brick & natural stone. It can also be used to decorate & protect new concrete surfaces. Paver-Saver Plus is a semi-transparent, penetrating, concrete stain & protective repellent which provides an attractive yet natural looking finish when applied over horizontal & vertical concrete surfaces. Paver-Saver Plus (12 oz bottle) must be mixed with a 1G bottle of Paver-Saver (Clear).
A clear, single component, waterborne, UV stable, high performance, fast drying acrylic emulsion which may be used as a concrete and cementitious sealer or as a vinyl chip grout coat. Exhibits excellent adhesion and penetration when applied over new and existing concrete surfaces.
