10. Waterproof Deck Coatings

Ultra-Flex 700 (Membrane)

Ultra-Flex 700 is a two component, fast setting, fast curing, solvent free, flexible, high performance and high solids polyurethane elastomeric membrane applied to interior or exterior concrete, plywood and metal surfaces. May be applied at any rate to achieve desired thickness. Gray in color.

data sheet |   msds sheet  

Ultra-Flex 725

ULTRA-FLEX 725 is a single-component, flexible, waterborne, ready-to-use, waterproof coating that can be used for a wide variety of applications. Ultra-Flex 725 can be applied to both horizontal and vertical surfaces while exhibiting excellent adhesion and over 1000% elongation when applied by roller over properly prepared substrates. Ultra-Flex 725 bonds to many surfaces including concrete, wood, metal and tile.

Ultra-Flex 725 is available in three premixed, ready-to-use grades:

Roll-On Grade
Trowel Grade
Joint & Crack Filler Grade

data sheet |   msds sheet  

Ultra-Flex 750 (Polyurethane Topcoat)

Ultra-Flex 750 is a two component, fast setting, rapid curing, solvent free, 100% solids, hybrid, aliphatic, polyurea elastomeric membrane applied to interior or exterior concrete, plywood and metal surfaces. Suitable for single or multiple applications in temperatures as low as 20°F. Available in Dolphin Gray and Tan.

data sheet |   msds sheet  

Ultra-Guard 300 (Polyaspartic Topcoat)

Ultra-Guard 300 is a high solids, two-component, liquid applied, aliphatic polyaspartic polyurea which exhibits excellent retention, gloss and UV stability. Ultra-Guard 300 is quick curing and specifically formulated to be installed in thin film applications (8-12 mils in a single pass). An excellent topcoat over aromatic polyurea, polyurethane and epoxy applications. Available in Clear, Dolphin Gray and Tan.

Ultra-Guard 350 (Polyaspartic Topcoat)

Ultra-Guard 300 is an aliphatic, environmentally friendly, UV resistant, 77% solids, polyaspartic surface topcoat. Ultra-Guard 350 has a longer working time than most polyaspartic coatings making it user friendly. Recommended for exterior use only.

Ultra-Prime 125

Ultra-Prime 125 is a two-component, high solids, liquid applied, epoxy-polyamine primer with exhibits unique penetrating characteristics. U-Coat Primer is designed to be applied over properly prepared concrete and plywood surfaces prior to the installation of U-Coat polyurethane coatings.

data sheet |   msds sheet  

Ultra-Prime 165

.Ultra-Prime 165 is a two-component, high solids, liquid applied, epoxy-polyamine primer with exhibits unique penetrating characteristics. Ultra-Prime 165 is designed to be applied over properly prepared metal, concrete and plywood surfaces prior to the installation of U-Coat polyurethane coatings.

data sheet |   msds sheet  

Ultra-Prime 175

Ultra-Prime 175 is a two-component, high solids, liquid applied, re-coat primer designed to be applied over properly prepared, existing urethane systems prior to the installation of new Umaco urethane coatings.

data sheet |   msds sheet