• Home
  • Admixtures & Bonding Agents
  • Resurfacing, Patch & Plug
  • Stucco Systems
  • Thin-Stone Veneer Mortars
  • Sealers, Stains & Repellents
  • Waterproof Membranes & Deck Coatings
  • Epoxy, Urethanes & Decorative Coating Sy
  • Cleaners, Etcher & Non-Slip
  • Contact

Keep Your Concrete Surfaces Safe with Solvent Acrylic Sealers

Transeal
Data SheetMSDS Sheet
Exterior-grade, clear, solvent acrylic sealers commonly applied over properly prepared masonry and concrete surfaces. Transeal forms a durable, flexible film that provides long-lasting protection. It’s available in a clear (gloss or matte) formulation.
Transeal WB
Data SheetMSDS Sheet
An interior/exterior, durable, waterborne acrylic sealer applied over properly prepared masonry and concrete surfaces. Transeal WB has a low odor level, making it an ideal sealer for interior spaces. It’s being offered under a clear or gloss formulation.
Hydro-Pel
Data SheetMSDS Sheet
Hydro-Pel is a one-component, clear, penetrating, water-based, aliphatic polyurethane designed to be used as a water, oil and stain repellent. Hydro-Pel mechanically and chemically bonds to a wide variety of mineral substrates including, but not limited to brick, concrete pavers, concrete slabs, block, stucco, natural stone, clay tile and brick. Hydro-Pel reduces undesired stains, cracking, freeze/thaw damage, chemical degradation, biological growth, efflorescence and dirt pickup
Siloxane 20
Data SheetMSDS Sheet
This is a clear, exterior-grade, solvent-based water repellent. It’s known to penetrate deeply when used against untreated masonry and concrete surfaces.
Color-Seal
Data Sheet
Color-Seal is a water-based, low-odor, acrylic stain and sealer applied over brick, block, stucco, and concrete pavers. It provides long-lasting protection while improving the appearance of the substrate as it adds color.
Elastoflex
Data Sheet
A flexible, stretchable, waterborne acrylic elastomeric coating that waterproofs and decorates exterior stucco, masonry, and concrete walls. Elastoflex bridges hairline cracks and will stretch and move with the expansion of the treated building. It can be purchased in a variety of colors.
Paver-Saver
Data SheetMSDS Sheet
Paver-Saver is a one-component, clear, penetrating, water-based, aliphatic polyurethane. It has been designed as a water, oil, and stain repellent. Paver-Saver mechanically and chemically bonds to various mineral substrates, including, but not limited to, concrete pavers, concrete slabs, stucco, natural stone, clay tile, and brick. Paver-Saver is also known to reduce undesired stains, cracking, freeze/thaw damage, chemical degradation, biological growth, efflorescence, and dirt pickup.
Paver-Saver Plus
MSDS Sheet
Paver-Saver Plus renews, rejuvenates, and decorates faded concrete, concrete pavers, retaining wall blocks, stucco, brick, and natural stone. It can also be used to decorate and protect new concrete surfaces. Paver-Saver Plus is a semi-transparent, penetrating concrete stain and protective repellent that provides an attractive yet natural-looking finish when applied over horizontal and vertical concrete surfaces. For best results, Paver-Saver Plus in a 12-ounce bottle must be mixed with one bottle of Paver-Saver (Clear).
Ultra-Seal 500
Data SheetMSDS Sheet
This is a clear, single-component, waterborne, UV-stable acrylic emulsion. It’s a high-performing product that dries quickly when used as a concrete and cementitious sealer or as a vinyl chip grout coat. Ultra-Seal 500 exhibits excellent adhesion and penetration when applied over both new and existing concrete surfaces.
Concrete Cure and Seal
Data SheetMSDS Sheet
CONCRETE CURE & SEAL is a waterborne acrylic emulsion designed to cure, seal, harden and dustproof new or older concrete substrates. When applied after finishing, Concrete Cure & Seal forms a membrane which retains mix water, allowing normal hydration helping to eliminate scaling of concrete.
Hydro-Stop 25
Data SheetMSDS Sheet
HYDRO-STOP 25 is a permanent, VOC Free, water-based, cost effective solution used to protect finished coatings from concrete moisture related issues and extends the integrity and service life of concrete. Hydro-Stop 25 can be applied at the time of the concrete pour, to new and existing concrete surfaces, and can be applied underneath or over the surface of any cement based concrete patch. Hydro-Stop 25 solidifies to fill the pores below the surface of the concrete slab preventing moisture from reaching the surface. Hydro-Stop 25 can be applied to interior and exterior concrete surfaces including slabs (below/on/above grade), garages, driveways, patios and porches, sidewalks and concrete pavers.
Our products have been widely used and trusted by Professional Contractors for over 60 years.
© Copyright 2025 Network Solutions, LLC. All rights reserved.
contact
Phone: 800-442-5535
Email
Address: 60 Rear Newhall St. Lowell, MA 01852
Service Area Northeast USA

We use cookies to enable essential functionality on our website, and analyze website traffic. By clicking Accept you consent to our use of cookies. Read about how we use cookies.

Your Cookie Settings

We use cookies to enable essential functionality on our website, and analyze website traffic. Read about how we use cookies.

Cookie Categories
Essential

These cookies are strictly necessary to provide you with services available through our websites. You cannot refuse these cookies without impacting how our websites function. You can block or delete them by changing your browser settings, as described under the heading "Managing cookies" in the Privacy and Cookies Policy.

Analytics

These cookies collect information that is used in aggregate form to help us understand how our websites are being used or how effective our marketing campaigns are.