Upgrade Your Concrete Space with a Flexible Waterproofing Membrane
Hydro-Gard 33
Hydro-Gard 33 is a ready-to-use, solvent-free, flexible waterproofing membrane with a crack-isolation feature. It is used for a wide variety of applications and provides a continuous barrier to protect adjacent rooms and areas from water damage.
Hydro-Grip
HYDRO-GRIP is a one-component, solvent-free, textured, decorative coating which provides waterproof protection and long-lasting durability under heavy foot traffic & harsh environmental conditions.
Ultra-Flex 700 (Membrane)
Ultra-Flex 700 is a flexible, two-component, high-performing polyurethane elastomeric membrane. It sets and cures quickly when applied to interior or exterior concrete, plywood, and metal surfaces. Ultra-Flex 700’s high solids property can be used at any rate to achieve the desired thickness. It’s solvent-free and has a distinct gray color.
Ultra-Flex 750 (Polyurethane Topcoat)
Ultra-Flex 750 is another two-component, solvent-free polyurea elastomeric membrane polyurea elastomeric membrane often applied to the interior or exterior part of concrete, plywood, and metal surfaces. Like the Ultra-Flex 700, it has fast setting and rapid curing features apart from aliphatic, hybrid, and 100% solids. Suitable for single or multiple applications in temperatures as low as 20°F, this solvent-free membrane comes in tan and dolphin gray colors.
Ultra-Prime 125
Ultra-Prime 125 is a two-component, high solids, liquid-applied, epoxy-polyamine primer. It boasts uniquepenetrating properties that enable it to work well over properly prepared concrete and plywood surfaces before using U-Coat polyurethane coatings.
Ultra-Prime 165
Made from a two-component, high-solids epoxy-polyamine primer, the Ultra-Prime 165 also exhibits unique penetrating characteristics. With its liquid-applied feature, this primer has been developed as an initial treatment for properly prepared concrete, metal, and plywood surfaces before the U-Coat polyurethane coatings are used.
Ultra-Prime 175
This re-coat primer has a dual-component, high-solids, liquid-applied design. It’s commonly applied first over properly prepared, existing urethane systems and followed by the installation of new urethane coatings.