09. Epoxy, Polyaspartic & Urethane

Click on "DATA SHEET" to view the brochure for Umaco Resinous Floor Coatings and color charts.

Ultra-Shield 200 is a clear, 2-component, 100% solids, UV resistant, epoxy topcoat.

A colored, two-component, 100% solids, epoxy coating which provides a tough finish that combines excellent chemical and impact resistance.

Ultra-Guard 300 is an aliphatic, environmentally friendly, UV resistant, 91% solids, polyaspartic surface topcoat for flooring systems which require a quick curing time.

Ultra-Guard 300 is an aliphatic, environmentally friendly, UV resistant, 77% solids, polyaspartic surface topcoat for flooring systems. Ultra-Guard 350 has a longer working time than most polyaspartic coatings making it user friendly. Recommended for exterior use only.

A clear- two-component, waterborne, UV resistant, aliphatic polyurethane which cures to an inert, tough, impact, abrasion and chemical resistant finish coat. Available in Gloss, Satin and Matte.

ULTRA-SEAL 450 is a low sheen finish, aliphatic, three-component clear (or four-component pigmented) chemical resistant 90% CRU for use in high traffic environments needing a highly durable, chemical & abrasion resistant U.V. stable topcoat.

ULTRA-SEAL 475 is a high-gloss, 86% solids, single-component, solvent-based, moisture cured polyurethane topcoat which yields a highly light reflective, smooth finish with U.V. stability and good gloss retention. Ultra-Glaze 475 also provides excellent abrasion, impact and chemical resistance.

Ultra-Prime MVB is a clear 2-component, 100% solids, low odor, low viscosity epoxy that is specifically formulated as a moisture barrier coating to treat new and existing concrete floors with high moisture and high pH.

Ultra-Prime 100 is a two-component, water-based epoxy coating that exhibits excellent substrate penetration, superb chemical and abrasion resistance.
Available in Clear or in a variety of colors

Ultra-Prime 150 is a two-component, colored, 100% solids epoxy primer for general use.

ULTRA-COVE 900 is a two-component, clear, epoxy paste designed for vertical applications where extra non-sag properties are required. Ultra-Cove 900 can be used as a primer, a mortar system and a sealer.